The QC2 DLF is used to measure the thickness of dry non-conductive coatings applied over Ferrous bases. Coatings such as paint, varnish and laquer, or platings such as nickel, zinc and chrome, can all be quickly and accurately measured.
The gauge features a large LCD display with a bright LED backlight, 3 calibration modes, average reading, a Data Logger for 1000 readings that can be sent to a PC using DMQ DataCenter software and more.
Method: Eddy current Probe: Intregated Range: 0 to 1250μm / 0 to 49mils Resolution: Hasta 99.9µm: 0.5µmm. 9.99Mil: 0.01Mil. Desde 100µm: 1µm. 10Mil: 0.1Mil. Precision: ±1 at 3% +2μm (+0.07Mil)
Metric: Microns (µm) Imperial: Inches (Mils)
Modes: Base only Base and one point
Coupling: Coupling indicator
Low & High: User defined value Alarm Types: Visible: Flashing backlight or irregular digits
Digits: 17mm / 0.66in tall Graphic LCD: 128×64 pixels Viewable Area: 45 x 30mm / 1.77 x 1.18in Backlight: LED backlight (ON, OFF, Auto)
Languages: English, Spanish
Storage: Up to 1000 readings Data Transfer: USB using dmq DataCenter software (included) Capture Modes: Manual: touch the Store key
Connectivity: USB
Membrane keyboard High strength polyester
Dimensions: H: 115mm / 4.52in L: 69mm / 2.7in W: 28mm / 1.10in Weight: 175g / 7.05oz with batteries Working Temperature: -10°C to 50°C / 14°F to 122°F Storage Temperature: -20°C to 60°C / -4°F to 140°F Enclosure: High impact ABS Front Panel: Polyester
Batteries: 2 x AA 1.5v Alkaline 2 x AA 1.2v Ni-MH Rechargeable Battery Life: 100 hours with backlight off Battery Indicator: On all screens with a low level alarm Auto-Off: 3 minutes
Electronic Unit: 5 year limited
